The installation process of solar panels is possible on roofs or the ground. Most homes have natural sunlight available for maximum energy production, so that’s where most people install their systems. But if a roof doesn’t meet your specifications and you still want to tap into this renewable resource, it might be better off installing outside in direct sunlight instead – just make sure there are no objects blocking access! Well, how are solar panels installed?

Here are a few steps that will explain solar panel installation on a roof:

Set Up Scaffolding

With the safety of those working on my roof in mind, I erected an appropriate scaffolding for them to use.

Install Solar Panel Mounts

The solar panel installation for the new construction has to be carefully planned. Setting up the mounting system is essential and should have a tilt angle between 18-36 degrees to ensure maximum sunlight exposure.

Install the Solar Panels

The mounts have to be installed before the solar panel can be mounted on a structure. Once that has been done, make sure all of the bolts and nuts are tight so as not to let them fall off during installation!

Wire the Solar Panels

In the installation process, the next step is to install the electrical wiring. MC4 connectors are used in most cases because they are suited for all types of solar panels and come with a lifetime warranty! Ensure to shut off your household’s electricity supply during this part of the installation or risk serious injury from electric shock hazards.

Install Solar Inverter

After that, the solar inverter needs to be connected to the system. Typically, it is installed near the main panel and it could either be indoors or outdoors, depending on your specific needs. Inverters are more efficient when kept in cooler places so make sure you install yours accordingly if outdoor use is desired! If installing outside, do not place them under direct sunlight as they will overheat very quickly; which can cause electrical shutdowns and other malfunctions such as a power outage during morning hours,, for instance.

Bond Solar Inverter and Solar Batteries

After the solar inverter is connected to the battery, you will have a safety net against cloudy days in which there isn’t enough usable energy. This can also lower installation costs for your storage system because it’s easier on your wallet!

Connect the Inverter to the Consumer Unit

The inverter needs to be connected to the consumer unit in order for electricity to produce. A generation meter is also necessary and can help monitor how much energy you’re producing from solar panels. Using your computer or another device, it’s easy enough to see what time would work best for using a washing machine or any other utility things that everyone has these days!

Start and Test Solar Panels

In order to complete your solar panel installation, you will need to switch the power on and test it. If everything works as planned, then congratulations! You have successfully installed a new solar system for your home or business.

We hope this blog post was helpful for you. If you want to read more such articles, visit our site GoBlueSun

LEAVE A REPLY

Please enter your comment!
Please enter your name here