Are you looking for ways of how to fix solar lights, you are in the right place. In this blog post, we are going to discuss the ways of fixing solar light.
Dismantling and Cleaning
In order to ensure that your solar lights are running at full efficiency, try cleaning the sensor and dusting off the LED. Sometimes just a quick swipe of an unused cloth will do wonders! The downside is if it’s dirty enough or has been on too long, then these simple fixes won’t work.
- Based on the model, there will be screws either at the top or bottom of your case. No, unscrew all that you find and leave them such that if we need to put it back together again, you know which one goes where.
- Inside the case will be a detailed electronic arrangement, including batteries. You may need to unscrew their casing first before switching them out and putting in your new ones!
- Clean the glass casing with a cleaning fluid or damp cloth. If there’s a lot of dirt on it, rinse under the sink for easier cleanup and to avoid scratching your surface.
- Clean the contacts on your battery to ensure you get a good connection and prevent corrosion. If the light is old, use sandpaper or steel wool to remove stubborn rust from metal connections that might stop current flow when connected with new batteries.
Battery Problems
It is very easy to fix this problem. Clean the battery contacts and then replace the battery in the casing.
- If the problem is dirt, the light should be working fine now.
- Check the wires if they are loose. If so, get them connected again by someone who knows how to solder the wire back together. You may find that a small screw came out of one side, which you will need to be replaced with an identical size screw as soon as possible, for it won’t work otherwise!
- If your light is old, chances are the battery has gone dead. You can try using another solar light’s batteries or get new ones to see if that solves the problem.
- If none of this works, the problem lies in either the sensor or the LED.
Sensor and LED Problems
The LED on the sensor is too dim. If you replace it, then that will tell you whether or not this was the problem all along. You may be able to actually see a difference in brightness between different types of LEDs!
- One reason for the sensor not to work is because there’s dirt on it. Clean up and see if it is working. If there is no dirt, check the coating of your sensors that can shut down when exposed to sunlight after months which will eventually turn opaque from time exposure-easy fix with a little chipping or scotch tape!
- If your light is still not working, you may have a dead sensor. If the LED has died and this method doesn’t work for you, replace just the bulb instead of both pieces!
The thing with solar lights are made cheaply and sold cheaply. But the essence of buying a solar light is to decrease one’s carbon footprint, which doesn’t solve anything by purchasing another when there was an issue in the first place; fix it rather than buying new!
FAQ’s
How do you fix solar lights that stopped working?
Regularly clean the solar panels.
Dust on solar panels reduces the charging time and can cause a decrease in battery life. To clean them, use soapy water that is most effective for ridding dirt from your panels!
Can a solar light be fixed?
You can fix your outdoor solar lights. These simple-to-install lights, incorporating solar cells that turn sunlight into electricity to power the light with batteries to store the energy, have a few quirks, making them less reliable over time as they age and degrade more quickly in certain areas climates.
Why has my solar light stopped working?
There are a number of reasons why solar-powered lights might not be working. Check the batteries first, and if they work with regular, store-bought ones, then it is likely that either your rechargeable battery or the panel has failed you.
Can you replace batteries in solar lights?
In most solar garden lights, you can simply remove the battery cover and replace it with a new rechargeable battery of the same specification.
