Solar panels, especially solar PV panels, have a lot of potential in the future. It is not surprising that most roofs are perfect for installing them because they need to receive maximum sunlight, but if you don’t want anything on your roof or it’s too dark up there, then maybe ground installation will work better! Do you want to learn how to install solar panels?
The following steps explain solar panel installation on a roof:
Set Up Scaffolding
First of all, you have to erect scaffolding on the roof when you’re installing panels for safety.
Install Solar Panel Mounts
The solar panel mounting system needs to get set up. This will then support the base of the solar panels. The whole mounting structure must have an angle between 18 and 36 degrees for maximum sunlight exposure while tilting it slightly so that you get a good view at all times!
Install the Solar Panels
One of the important factors is to take into consideration when installing your solar panels is that they must be securely mounted. When the mounts are set up, make sure you tighten all bolts and nuts to stay stable.
Wire the Solar Panels
The next step is to install electrical wiring. MC4 connectors are used because they work with all types of solar panels and can be shut off from household electricity supply during installation for safety reasons.
Install Solar Inverter
After that, the solar inverter needs to be connected to your home’s system. It is installed close to the main panel, and it could be indoors or outdoors- you’ll want to keep it in a cooler place, though! If outdoor, make sure not too exposed during afternoons when sun exposure can affect its efficiency.
Bond Solar Inverter and Solar Batteries
Installing a solar power system can be a little bit expensive, but with the help of the best inverter, you’ll save yourself from worrying about not being able to use your power when it’s cloudy outside.
Connect the Inverter to the Consumer Unit
Solar panels can be a great alternative to high power bills. Think about it, by the time you get home and work on your laptop or another device for an hour or two – not even in direct sunlight -you might have generated enough electricity from solar that could’ve powered your washing machine during this short time period!
Start and Test Solar Panels
The final step is to switch on the power and test your newly installed solar panel system. And, of course, after that, you’ll be finished with all the hard work!
Do you need to be an electrician to install solar panels?
To install solar panels legally, you will need to speak with a licensed builder or electrical contractor. Check their license online and call NSW Fair Trading on 13 32 20
What qualifications do I need to install solar panels?
The company is always looking for qualified electricians who understand wiring regulations. They require a Certificate in the Requirements for Electrical Installations or an equivalent qualification to be considered as well-qualified.
How long does it take to learn to install solar panels?
The time it takes to install solar panels can vary from one month to three months, depending on the factors. Three months is a long time, especially while your air conditioner hums in the background and gobbles up expensive energy.
Can I install solar power myself?
The answer is yes. There are some very serious drawbacks to going it alone. Installing solar panels isn’t exactly as simple as mounting a light fixture or switching out your water filtration system.